Buzzaround EX 4-Wheel Extreme Mobility Scooter

• Specifications for the Buzzaround EX 4-Wheel

  Quick-Ship:	Yes
  Top Speed:	5.00 mph
  Turning Radius:	56"
  Drive Range:	18.00 miles
  Weight Capacity:	330.00 Lbs
  Heaviest Piece:	53 lbs.
  Ground Clearance:	4.00"
  Disassembles:	Yes
  Delta Tiller:	Yes
  Adjustable Tiller:	Yes
  Seat Width:	18" 20"
  Back Height:	16"
  Max Seat to Ground Height:	24.75"
  Lowest Seat to Ground Height:	22.75"
  Max Seat to Deck Height:	18"
  Multiple Seating Options:	Yes
  Power Elevating Seat:	No
  Height Adjustable Seat:	Yes
  High-Back Seat:	No
  Armrest Options:	Flip-Back
  Flip-Back Armrests:	Yes
  Wheel Type:	Four Wheeled
  Front Wheel Size:	9"
  Rear Wheel Size:	9"
  Air-Filled (Pneumatic) Tires:	No
  Overall Width:	22"
  Overall Length:	44"
  Axle-to-Axle Length:	33.80"
  Transportable/Collapsible:	Yes
  Battery Type:	Two U-1 Batteries
  Batteries Included:	Yes
  Battery Charger Type:	Off Board
  Larger Battery Option:	No
  Drive Type:	Rear-Wheel Drive
  Suspension:	Yes
  One-Hand Operation:	Yes
  Basket Included:	Yes
  Headlight:	Yes
  Weight Without Batteries:	109.00 lbs.
  Battery Pack Weight:	46.00 lbs.
  Seat Section Weight:	23.00 lbs.
  Shroud Weight:	53.00 lbs.
  Base and Tiller Weight:	30.00 lbs.
  Expedited Shipping Available:	No
  Charging Port Location:	Tiller

Wheelchair Measuring Guide

Wheelchair Measurements:

1. Hip Width:
   Use this to figure seat width if it is the widest point.
2. Widest Point:
   Measure the widest area across the lower extremities if different from the hip width. This may influence seat width or arm style.
3. Chest Width:
   Measure the widest point of the thorax just below the arm pit. This measurement may influence system width or back width.
4. Heel to Knee:
   Use this for legrest extensions and seat height.
5. SRP to Knee (Seat Reference Point to Knee):
   This will determine the seat depth.
6. Elbow to SRP (Elbow to Seat Reference Point):
   Measure this width with the arm in a 90 degree angle at the elbow and the shoulder in a neutral position.
7. Shoulder Height:
   This will determine the height and the style of the back panel or the start for a custom back.
8. Head Height:
   This will help determine the proper headrest height.