ShowerBuddy SB3T Roll-InBuddy Commode Chair with Tilt

The ShowerBuddy Roll-inBuddy Commode Chair with Tilt has all the same great features standard to the Roll-inBuddy plus one more.
The revolutionary tilt option allows for pressure release as well as a more thorough bathing experience for the patient and easier reach for the caregiver.

This product incorporates all the same safety features and corrosion resistant materials standard to all Showerbuddy products.

The TubBuddy with Tilt has all of the same great features as the standard TubBuddy but with a tilting chair. The tilt feature on this model allows the user to slide across the bridge and into the tub without having to lift or move their legs them-self, just tilt the chair back and the footrest will clear the edge of the bathtub.

Are you ready? Just contact one of our mobility advisers at 866-218-0902 about the ShowerBuddy Roll-InBuddy Commode Chair with Tilt

Features:

Tilting chair reduces caregiver and user strain during transfers
Flip-up, removable and lockable armrests
Swing-away and removable footrests
Adjustable height base and neckrest
Lap belt, chest belt and calf strap included
Weight capacity: 300 lbs

Specifications for the TubBuddy with Tilt

Seat Width:	18"
Seat Depth:	16.50"
Seat Height:	24.8" to 28.8"
Overall Width:	22.50"
Rolling Base Width:	19.30"
Overall Depth:	41.70"
Rolling Base Depth (without footrests):	33.00"
Overall Height:	50.2"
Rolling Base Depth (with footrests):	43.30"
Back Height:	21.5"
Back Width:	18"
Maximum Toilet Height Clearance:	19.40"
Bridge Length (standard):	11.80"
Commode Opening Width:	6.80"
Commode Opening Depth:	13.00"

Wheelchair Measuring Guide

Wheelchair Measurements:

Hip Width:
Use this to figure seat width if it is the widest point.

Widest Point:
Measure the widest area across the lower extremities if different from the hip width. This may influence seat width or arm style.

Chest Width:
Measure the widest point of the thorax just below the arm pit. This measurement may influence system width or back width.

Heel to Knee:
Use this for legrest extensions and seat height.

SRP to Knee (Seat Reference Point to Knee):
This will determine the seat depth.

Elbow to SRP (Elbow to Seat Reference Point):
Measure this width with the arm in a 90 degree angle at the elbow and the shoulder in a neutral position.